|
Flange Pins & Aligners
MRO Products Measuring & Leveling Tools Flange Pins & Aligners
 |
Part #: 430-3001903
Manufacturer: Contour®
Notes/Restrictions: The Curv-O-Mark® Aligner Base is notched at either end for ease in aligning on the centerline of the pipe and has two 25-pound pull, cast-in magnets for holder either a flat horizontal or vertical position|The base will accept either leg of a standard or
Description: 32 FLANGE ALIGNER BASE
|
|
 |
Part #: 496-42050-TL
Manufacturer: Flange Wizard®
Notes/Restrictions: This model has pins that are threaded|One pin has a bubble for easier vertical leveling|Up to 4" thick flange|Extensions are available to accommodate thicker flanges (2-7/8" stud #0501, 4-1/2" stud #0503 plus Coupling #0503-EX)
Description: 2 PC. SET TWO HOLE THREADED PINS LARGE
|
|
|
|
Part #: 496-42050-T
Manufacturer: Flange Wizard®
Notes/Restrictions: This model has pins that are threaded|One pin has a bubble for easier vertical leveling|Up to 2-1/2" thick flange|Extensions are available to accommodate thicker flanges (2-7/8" stud #0501, 4-1/2" stud #0503 plus Coupling #0503-EX)
Description: 2 PC. SET TWO HOLE THREADED PINS
|
|
 |
Part #: 496-38240-T
Manufacturer: Flange Wizard®
Notes/Restrictions: Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs|All models of the Pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one step|Al
Description: 2 PC. SET FLANGE ALIGNERTHREADED PINS
|
|
|
|
Part #: 496-38240
Manufacturer: Flange Wizard®
Notes/Restrictions: Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs|All models of the Pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one step|Al
Description: DWOS FLANGE ALINGER FRICTIONPINS 2 PC SET
|
|
|
|
Part #: 496-42050
Manufacturer: Flange Wizard®
Notes/Restrictions: This model features slotted pins with "friction fitting" knurled nuts|One pin has a bubble for easier vertical leveling|Up to 2-1/2" thick flange
Description: DWOS 2 PC SET TWO HOLE PINS
|
|
Most Popular Products
Viewing Page
|
