|
Calipers & Dividers
MRO Products Measuring & Leveling Tools Calipers & Dividers
 |
Part #: 318-842
Manufacturer: General Tools
Notes/Restrictions: Carpenter quality compass is made of long lasting die cast, rust resistant metal|Adjustment is spring tension
Description: PENCIL COMPASS DIVIDER& SCRIBER W/PENCIL
|
|
 |
Part #: 318-729
Manufacturer: General Tools
Notes/Restrictions: Decimal equivalents table on back
Description: POCKET CALIPER 0-4"RANGE STAINLESS 16TH 32N
|
|
 |
Part #: 681-50189
Manufacturer: L.S. Starrett
Notes/Restrictions: An improved joint, designed so the tension can be adjusted|The legs are made from a high-grade steel|Tension does not change with opening and closing of legs
Description: 26-12 12" IMPROVED FIRM-JOINT CALIPER OUTSIDE
|
|
 |
Part #: 681-64514
Manufacturer: L.S. Starrett
Notes/Restrictions: Knife-edge contacts for both inside and outside measurements|One hand use with the thumb-operated, fine adjustment roll|Lock screw for dial bezel|Lock screw for holding the sliding jaw in position|Positive, split-gear anti-backlash control|Rack teeth poin
Description: 120A-6 6" DIAL CALIPER I
|
|
 |
Part #: 681-50373
Manufacturer: L.S. Starrett
Notes/Restrictions: Legs are made from flat stock|Strong, flexible bow spring|Fulcrum stud is hardened and has a smooth bearing surface|High-grade steel construction|Quick-adjusting automatic-closing spring nut
Description: 79B-12 12" OUTSIDE CALIP
|
|
 |
Part #: 681-50196
Manufacturer: L.S. Starrett
Notes/Restrictions: An improved joint, designed so the tension can be adjusted|The legs are made from a high-grade steel|Tension does not change with opening and closing of legs
Description: 27-12 12" IMPROVED FIRM-JOINT CALIPER INSIDE
|
|
 |
Part #: 681-50343
Manufacturer: L.S. Starrett
Notes/Restrictions: Legs are made from flat stock|Strong, flexible bow spring|Fulcrum stud is hardened and has a smooth bearing surface|High-grade steel construction|Quick-adjusting automatic-closing spring nut
Description: 73B-12 12" INSIDE CALIPE
|
|
 |
Part #: 504-505-675
Manufacturer: Mitutoyo
Notes/Restrictions: Designed with a new dial movement to give an ultra smooth feel and provide extra shock protection for the gear train|A TiN coating has been applied to the beam wear surface on the 6 & 8" calipers to increase tool life
Description: 6" DIAL CALIPER
|
|
 |
Part #: 504-500-196-20
Manufacturer: Mitutoyo
Notes/Restrictions: Allows direct measurements from power on|Zero-setting of the display is also possible at any slider position|Special functions which allow it to always remember its measuring position even after the gage has been switched off
Description: DIGI MYCAL 0-6" MICROMETER W/ABS
|
|
 |
Part #: 504-500-171-20
Manufacturer: Mitutoyo
Notes/Restrictions: Allows direct measurements from power on|Zero-setting of the display is also possible at any slider position|Special functions which allow it to always remember its measuring position even after the gage has been switched off
Description: 6" DIGIMATIC CALIPER
|
|
Most Popular Products
Viewing Page
[1]
2
»
View All
|
