|
Punches
MRO Products Hand Tools Chisels, Punches & Pins Punches
 |
Part #: 318-77
Manufacturer: General Tools
Notes/Restrictions: Unique ball bearing action|All-steel solid point is replaceable|Long wearing alloy steel parts
Description: AUTOMATIC CENTER PUNCHALUMINUM BODY
|
|
 |
Part #: 318-78
Manufacturer: General Tools
Notes/Restrictions: Replaceable hardened steel point and shaft
Description: DWOS AUTOMATIC CENTER PUNCHHEAVY DUTY STEEL
|
|
 |
Part #: 318-79
Manufacturer: General Tools
Notes/Restrictions: Adjustable for light or heavy markings|Threaded replaceable hardened steel point and shaft
Description: AUTOMATIC CENTER PUNCHSTEEL
|
|
 |
Part #: 681-51181
Manufacturer: L.S. Starrett
Notes/Restrictions: Extra-long|Well proportioned, hardened, properly tempered, and have a knurled grip|For following long cotter pins and the like into holes with out hindrance
Description: 248A 8" DRIVE PIN PUNCH
|
|
 |
Part #: 681-50120
Manufacturer: L.S. Starrett
Notes/Restrictions: Tension of regulating spring is constant, so marks made by point are uniform in depth and size for each setting|Easily removable point|No hammer required, mechanism automatically strikes a blow when downward pressure is applied|Adjustable knurled cap regu
Description: 18A 5" AUTOMATIC CENTERPUNCH 9/16" DIAMETER
|
|
 |
Part #: 479-74003
Manufacturer: Mayhew? Tools
Description: 416 1/2" CENTER PUNCH
|
|
 |
Part #: 577-413/8
Manufacturer: Proto®
Notes/Restrictions: Modified parabolic striking end for greater resistance to mushrooming and chipping|For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points
Instructions: Federal Spec. GGG-P-831e|ANSI Spec. B209.2
Description: PUNCH CENTER
|
|
 |
Part #: 577-155/8
Manufacturer: Proto®
Notes/Restrictions: Modified parabolic striking end for greater resistance to mushrooming and chipping|For lining up holes in flanges, assemblies, and for other mating parts and for removing long pins and shafts
Instructions: ANSI Spec. B209.2
Description: PUNCH ALIGN 16
|
|
|
|
Part #: 577-415/8
Manufacturer: Proto®
Notes/Restrictions: Modified parabolic striking end for greater resistance to mushrooming and chipping|For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points
Instructions: Federal Spec. GGG-P-831e|ANSI Spec. B209.2
Description: PUNCH CENTER
|
|
|
|
Part #: 577-411/2
Manufacturer: Proto®
Notes/Restrictions: Modified parabolic striking end for greater resistance to mushrooming and chipping|For metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points
Instructions: Federal Spec. GGG-P-831e|ANSI Spec. B209.2
Description: PUNCH CENTER
|
|
Most Popular Products
Viewing Page
[1]
2
»
View All
|
