|
Dry Lubes
MRO Products Chemicals, Lubricants & Paints Lubricants & Penetrants Dry Lubes
 |
Part #: 125-03084
Manufacturer: CRC
Notes/Restrictions: High anti-friction and anti-seizure properties|Lubricant resists high temperatures, high pressure, water and chemical attack|Fast drying film resists dirt and dust build-up
Description: 16-OZ DRY MOLY LUBRICANT
|
|
 |
Part #: 205-8078
Manufacturer: Crown
Notes/Restrictions: Forms a super slippery, non-staining film|Non-Corrosive|Non-flaking
Description: DRY GRAPHITE LUBE
|
|
 |
Part #: 205-6075
Manufacturer: Crown
Notes/Restrictions: An industrial strength lubricant that is ideal whenever silicone products are not acceptable, and higher temperatures or pressure performance is required|Reduces clean-up labor time and costs|Safe for rubber, wood, and metals|Won't interfere with post-fin
Description: DRY FILM LUBRICANT
|
|
 |
Part #: 463-L2F1C
Manufacturer: Dixon Graphite
Notes/Restrictions: Smaller flake size for use as dry lubricant or additive where tolerance is closer|Used dry as a lubricating additive in oils, greases and other substances, also as lubricant and parting agent on pipe joints, gaskets and packings|Will withstand high temper
Description: No.2 Medium Flake Graphite
|
|
 |
Part #: 428-01616
Manufacturer: LPS®
Notes/Restrictions: Dry film will not attract dust or dirt|Nonflammable|Colorless, thin film|Provides excellent lubrication|Excellent for releasing molded parts in high temperatures or pressures|Does not contain chlorinated solvents
Description: MR-750 Silicone Mold Release Lubricant|12 OZ. AEROSOL MR-750 MOLD RELEASE & L (Sold as a case of 12 ONLY)
|
|
 |
Part #: 428-02516
Manufacturer: LPS®
Notes/Restrictions: Fortified with molybdenum disulfide|Provides a quick-drying, thin film|For assembly and break-in lubrication|Works under high temperature: 842° F (450° C) and pressures: 100,000 psi (6890 Bars)|Prevents seizure of parts|High adhesion|Excellent for cables|
Description: 14 OZ FORCE 842 EXTREMECONDITION A
|
|
 |
Part #: 425-S00311
Manufacturer: Sprayon®
Notes/Restrictions: Made with DuPont Krytox dry film|Non-silicone mold release|Exceptional anti-stick properties that will not transfer to finished parts|Compatible with most moldable resins, elastomeric compounds, urethanes and styrenes|Won?t attack rubber, paints or metals
Description: 16-OZ. DRY FILM P.T.F.E.MOLD RELEAS
|
|
 |
Part #: 425-S00708
Manufacturer: Sprayon®
Notes/Restrictions: Dry, non-oily, non-staining lubricant with DuPont Krytox®|Extremely low static coefficient of friction (.02 to .04)|Dries quickly to a white, chemically inert film|Excellent for use in textile industries
Description: 16-OZ. T.F.E. DRY LUBE
|
|
 |
Part #: 425-S00204
Manufacturer: Sprayon®
Notes/Restrictions: Ideal where a dry lubricant is required or where petroleum products must be avoided|Adheres with minimum pre-treatment|Dries rapidly at room temperature|Effective up to 850 °F constant/1000 °F intermittent temperature|Contains no chlorinated solvents or O
Qty/Pack: 1, the minimum order is 12.
Description: 16 OZ. DRY GRAPHITE LUBE.
The minimum order is 12.
|
|
 |
Part #: 425-S00200
Manufacturer: Sprayon®
Notes/Restrictions: Penetrates pores of substrate and bonds to surface for long-lasting lubrication|Withstands high pressures up to 50,000 psi|Contains no chlorinated solvents or O.D.P|Air dries in 5-to-10 minutes, cures in 2 hours at room temperature|Works as boundary lube
Description: 16 OZ. DRY MOLY LUBE
|
|
Most Popular Products
Viewing Page
|
