|
Putty
MRO Products Adhesives, Sealants & Tapes Adhesive Products Putty
 |
Part #: 125-14070
Manufacturer: CRC
Notes/Restrictions: Specially formulated to bonds to both wet and dry surfaces and can be applied under water|2-part epoxy putty packaged in a 1-piece stick|Ready to use in less than one minute|Can be tapped, sawed, drilled, machined, stained, or painted
Instructions: Meets 1998 USDA guidlines for use in meat and poultry plants|Dielectric strength tested by ASTM D-149.
Description: 4OZ. MINUTE MEND EPOXY P
|
|
 |
Part #: 230-11600
Manufacturer: Devcon
Notes/Restrictions: Two-color stick ensures thorough mixing. Seals leaks and repairs gouges in steel, aluminum, wood, fiberglass, concrete, and ceramics. Can be painted, sanded, machined, tapped, or drilled|For plumbing repairs and marine use|Mixes quickly and hardens in 30
Instructions: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Description: 4 OZ. MAGIC BOND EPOXY STICK
|
|
 |
Part #: 230-15820
Manufacturer: Devcon
Notes/Restrictions: Trowelable urethane for repairing and lining process equipment exposed to wear, impact, abrasion, vibration, and expansion/contraction|Mixes easily and trowels on smoothly|Cures to a tough, medium-hard rubber |Flexane® Primers are recommended for maximum
Instructions: Dielectric strength tested according to ASTM D149.|Tensile strength tested according to ASTM D412.
Description: 1LB FLEXANE 80 PUTTYUREHTANE CO
|
|
 |
Part #: 230-10760
Manufacturer: Devcon
Notes/Restrictions: High-technology, titanium-reinforced epoxy for making repairs that can be precision machined|Excellent temperature resistance|High compressive strength|Resistance to chemicals and most acids, bases, solvents, and alkalis
Instructions: Qualifies under Mil Spec DOD-C-24176(SH) Type I & II
Description: #1 TITANIUM PUTTY
|
|
 |
Part #: 230-10270
Manufacturer: Devcon
Notes/Restrictions: Stainless steel-filled epoxy putty for patching, repairing, and rebuilding stainless steel food processing equipment|Bonds to ferrous and non-ferrous metals|Non-rusting|NSF certified for potable water applications|Acceptable for use in meat and poultry pl
Instructions: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure|Certified for potable water application.
Description: 1-LB STAINLESS STEELPUTTY ST
|
|
 |
Part #: 230-10110
Manufacturer: Devcon
Notes/Restrictions: The original metal-filled epoxy putty. Used for hundreds of routine maintenance, production, and tooling applications|Bonds to most metals concrete and some plastics|Cures at room temperature and forms a tough durable metallic mass that can be drilled tap
Instructions: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure|MIL|Qualifies under DOD-C-24176B(SH), Type I
Description: 1-LB PLASTIC STEEL PUTTY(A) 5300N-
|
|
 |
Part #: 230-10240
Manufacturer: Devcon
Notes/Restrictions: Fast-curing, steel-filled epoxy for emergency repairs at temperatures as low as 40°F|Cures to a tough, steel-filled material|Can be machined, drilled, tapped, or sanded|5-minute working time
Description: 1-LB PLASTIC STEEL 5MINUTE PUTT
|
|
 |
Part #: 230-10610
Manufacturer: Devcon
Notes/Restrictions: Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery, and equipment widely used in HVAC applications|Excellent resistance to chlorofluorocarbons|Bonds to aluminum and many other metals|Fills porosity in aluminum c
Instructions: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure|Qualified per MIL-DOD-C-24176B.
Description: 1-LB ALUMINUM PUTTY FHARD-5300N
|
|
Most Popular Products
Viewing Page
|
